The L.E. Wilson Bushing Type Full Length Sizing Die will allow you to size the case neck to your desired neck tension along with sizing down the rest of the case body at the same time. Die includes an adjustable depth decapping rod. Extra Decapping Punch included, does not contain an expander. Made of High-Quality Heat-Treated Steel. Bushing sold separately. This die features standard 7/8"-14 threads for use in most common reloading presses.
The Stainless-Steel Seater Die features a micrometer top for precise adjustments in .001" increments of seating depth. Both bullet and case are firmly held in perfect alignment as the bullet is seated in the case. Hand-die design for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. This comes with the standard seater drift. A VLD seater drift is available for purchase separately.
The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall length. Used to compare cartridges against the minimum SAAMI chamber dimensions, this process shows the reloader if ammunition is being produced within specifications for Case Length min/max and Headspace min/max. ** DOES NOT INCLUDE NECK BUSHING **
