Photo for reference only. It depicts the XL750 with items that are available at extra cost to the buyer. A caliber conversion kit will be needed to load ammunition.
This press ships UPS Ground to addresses in Lower 48 States only and an adult signature will be needed upon delivery.
The XL750 comes packaged from the factory, with these are the parts the press comes with from Dillon.
- 1 powder measure with standard large and small powder bars (small bar installed). The small bar throws from 2.1 to 15 grains of powder. The large bar throws from 15 to 55 grains of extruded powder or up to 60 grains of ball/spherical type powder.
- 1 primer system with large and small priming parts (appropriate size installed).
- 1ea large and one small primer pick-up tube.
- Low Primer Alarm
- 1 loaded cartridge bin
- 1 toolhead
- 1 powder die
- 1 set of standard Allen wrenches
Please note that XL650 conversion kit will interchange with XL 750. And, the same is true for the machine cover, toolhead, powder measure, powder die, in addition to the case feeder and case feeder plates.
In order to load ammo you will need to supply and install the appropriate conversion kit and die set and adjust them which need to be purchased separately.
You would need in addition a scale, loading manual, calipers, along with appropriate components.
The additional items shown in the picture are
- Conversion Kit
- Strong Mount for the XL650/750 #22052 or Strong Mount for the XL650/Xl750 and RL 550 #22051
- Toolholder and wrenches
- Low Powder Sensor for the powder measure #16306
- Variable Speed Case Feeder #62510
- Case Feeder Plate for the cartridge. ch
- Roller Handle #17950
- Bullet Tray #22214
- Low Powder Check Die #21044
- Dies vary between brand and application
